New Z955M EFI ZTrak™ Zero-Turn Mower

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereZ955M EFI ZTrak™ Zero-Turn Mower

Add Model --Please Select-- Pro Z 760L KW EFI Pro Z 772L KW Turf Tiger 52V-26CH-EFI, 61V-26CH-EFI Z Master 6000 74969 EFI

Add Model --Please Select-- Pro Z 760L KW EFI Pro Z 772L KW Turf Tiger 52V-26CH-EFI, 61V-26CH-EFI Z Master 6000 74969 EFI

Engine Manufacturer/model	ECV860J EFI
Engine Power	Gross at 3,600 rpm: 29 hp 21.6 kW
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Mower deck Size	60, 72 in. 152, 183 cm
Blade tip speed	Approximately 18,000 fpm 5,486 m/min
Transmission	Hydrostatic
Speed range	0-10 mph 0-16.1 km/h
Drive wheels	24x12-12
Caster wheels	13x6.5-6
Warranty	36 months or 1200 hours, whichever comes first First 24 months, no hour limitation

Manufacturer/Model	ECV860J EFI
Power	Gross t 3,600 rpm: 29 hp 21.6 kW
Displacement	50.3 cu in. 824 cc
Cylinders	Two
Crankcase capacity	With filter, 2.7 U.S. qt 2.6 L
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Air
Air cleaner	Pre-cleaner Yes Heavy-duty canister type with safety element

Fuel type	Gasoline
Fuel consumption	Under normal conditions, load, operation, and dependent on loads and operating conditions 1.0-1.8 U.S. gal./hr 3.8-6.8 L/hr
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Fuel tank switch/shut-off valve	Yes

Charge system	20 amp
Battery voltage	12 V
Cold cranking amp	300 amp
Hour meter	Standard, digital
Operator presence starting system	Brake-N-Go (hand)

Transmission	Hydrostatic
Hydraulic pumps
Wheel motors	Tuff Torq heavy-duty integrated piston wheel motor
Travel speed	Speed range 0-10 mph 0-16.1 km/h Forward 0-10 mph 0-16.1 km/h Reverse 0-4.5 mph 0-7.2 km/h
Speed and direction control	Twin levers
Hydraulic capacity	5.9 U.S. qt 5.6 L
Hydraulic oil cooler
Filter	Internal, replaceable

Warranty	36 months or 1200 hours, whichever comes first First 24 months, no hour limitation

Drive wheels	24x12-12
Rear tires
Load rating	4 PR

Dynamic braking	Twin levers
Park brake	Internal wet disk integrated in the transmission
Park brake actuation	Hand brake

Type	Electro-magnetic, 225 lb-ft 305 Nm
Drive	V-belt

Size	60, 72 in. 152, 183 cm
Deck construction	7Iron PRO, one-piece stamped steel with reinforcements
Deck thickness	7 gauge 0.18 in. 4.6 mm
Discharge	Side, MOD
Height-of-cut range	Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm
Cutting width	60, 72 in. 152, 183 cm

Length	Varies by deck size
Thickness	0.25 in. 0.64 cm
Blade tip speed	Approximately 18,000 fpm 5,486 m/min
Number	Three

Caster wheel type	Flat free
Caster wheels	13x6.5-6
Front anti-scalp rollers	RH, center, LH
Rear anti-scalp rollers	Optional

Length	84 in. 213.4 cm
Width	With chute down, 74, 86 in. 188, 218.4 cm
Height	With ROPS up, 73 in. 185.4 cm With ROPS down, 47 in. 119.4 cm
Weight	1,275 to1,365 lb 578 to 619 kg

Date collected	23-May-2018