New Z930M EFI ZTrak™ Zero-Turn Mower

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereZ930M EFI ZTrak™ Zero-Turn Mower

Add Model --Please Select-- Super Z FX850 Turf Tiger II 52V-26CH-EFI, 61V-26CH-EFI, 72V-26CH-EFI

Add Model --Please Select-- Super Z FX850 Turf Tiger II 52V-26CH-EFI, 61V-26CH-EFI, 72V-26CH-EFI

Manufacturer
Model no.	ECV749
Horsepower (gross)	At 3,600 rpm, 26.5 hp 19.7 kW
Displacement	45.6 cu in. 747 cc
Cylinders	Two
Crankcase capacity	With filter, 2 U.S. qt 1.9 L
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Air
Air cleaner	Pre-cleaner Yes Heavy-duty canister type with safety element

Fuel type	Gasoline
Fuel consumption	Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Fuel tank switch/shut-off valve	Yes

Charge system	20 amp
Battery voltage	12 V
Cold cranking amp	300 amp
Hour meter	Standard, digital
Operator presence starting system	Brake-N-Go (hand)

Wheel motors	Tuff Torq heavy-duty integrated piston wheel motor
Travel speed	Forward 0-10 mph 0-16.1 km/hReverse 0-4.5 mph 0-7.2 km/h
Speed and direction control	Twin levers
Hydraulic capacity	5.9 U.S. qt 5.6 L
Filter	Internal, replaceable
Hydraulic oil cooler
Hydraulic pumps

Drive tires	24x12-12
Load rating	4 PR
Rear tires

Dynamic braking	Twin levers
Park brake	Internal wet disk integrated in the transmission
Park brake actuation	Hand brake

Type	Electro-magnetic, 225 lb-ft 305 Nm
Drive	V-belt

Available widths	60 in. 152 cm
Deck construction	7-Iron PRO, one-piece stamped steel with reinforcements
Deck thickness	7 gauge 0.18 in. 4.6 mm
Discharge	Side, MOD
Height-of-cut range	Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm
Cutting width	60 in. 152 cm

Length	Varies by deck size
Thickness	0.25 in. 0.64 cm
Tip speed	Approximately 18,000 fpm 5,486 m/min
Number	Three

Caster wheel type	Flat free
Caster wheel size	13x6.5-6
Front anti-scalp rollers	RH, center, LH
Rear anti-scalp rollers	Optional

Length	84 in. 213 cm
Width	With chute down, 74 in. 188 cm
Height	With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm
Weight	1,275 to 1,350 lb 578 to 612 kg

Date collected	24-Apr-2017

Accessories and Attachments