New 5115ML Low-Profile Utility Tractor

Specialty Tractors
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • 115 hp John Deere PowerTechâ„¢ engine complies with emissions requirements and performs regeneration automatically for maximum uptime
  • 16F/16R PowrReverserâ„¢ transmission for easy, clutch-free forward and reverse
  • Newly designed low-profile hood for improved visibility and access
  • PowrReverser transmission w/ left hand shuttle-shift control

More Info

Features

Power bulge and torque reserve pull through the tough spots
Putting more power to the ground translates to increased productivity in demanding conditions. Simply put, torque is the useable power that can be achieved. More torque leads to more lugging ability which helps the operator be more productive.

5M Final Tier 4 (FT4) engines feature up to a 4 percent power bulge when put under load. The power bulge feature of the electronically controlled engine delivers additional horsepower as engine rpm drops below rated speed. Additionally, a 30 percent torque rise provides the force that maintains horsepower as engine rpm drops below rated speed.

When the tractor is under load, power bulge and torque rise work together to get through the tough spots without having to downshift. Horsepower and torque are mathematically related.

 

As rpm drops, the only way to maintain or increase horsepower is to provide additional torque. The output horsepower is greater than or equal to rated horsepower as the engine is pulled down to 1750 rpm.

The peak torque rise also occurs near the rated economy power take-off (EPTO) speed.

5ML power curve summary5ML power curve summary
5ML torque curve summary5ML torque curve summary
16F/16R PowrReverser™ transmission

The PowrReverser transmission provides 16F/16R speeds. This transmission comes standard with a dual-speed 540/540 Economy power take-off (PTO) and is ideal for applications requiring frequent directional changes.

Hydraulic wet forward and reverse clutches maximize durability and outlast the life of any dry clutch. When tractors are run by multiple operators with a variety of experience levels, a wet clutch is the best way to maintain transmission integrity and performance while decreasing clutch replacement costs.

Two platform-mounted levers offer easy and comfortable shifting for a pleasant operator experience. The gear-shift lever is easy to reach and the less-used range lever is shorter. Unique knobs make it easy to distinguish between the two. Also incorporated into the gear shift lever is the declutch button. No foot clutching is required to shift between gears within a range.

Integrated declutch button on gear shifterIntegrated declutch button on gear shifter

The forward lever, or gear shifter, selects one of four speeds, all which are synchronized shifts for on-the-go shifting with the use of the clutch or declutch button. The rear lever selects ranges A, B, C, or D. Ranges C and D are fully synchronized. That means, when upshifting, operators can move from range C to D without stopping the tractor. On the downshift, operators can move from D all the way to B without stopping.

 

Maximum productivity is achieved with clutchless hydraulic shifting between forward and reverse and is ideal for loader work and any other applications that require frequent directional changes in tight spaces. An electrohydraulic fingertip directional lever control allows the operator to effortlessly switch directions with a small finger motion.

 

This control is located on the left side of the instrument console and selects forward, reverse, and neutral positions. It also allows the operator to steer and shift direction with the left hand, freeing the right hand to operate other tractor controls, such as the loader, rear implements, or hand throttle. The PowrReverser transmission has a built-in engagement override valve for additional safety. This valve requires the clutch pedal to be depressed one time after each engine start before the transmission will begin to operate normally, giving the operator another opportunity to put all focus on the tractor.

 

NOTE: A neutral start switch requires the directional lever be in the neutral position to start the engine.

The speed of directional changes can be adjusted to the operator's preference or application demands with the field-installed infinitely variable control kit.

The 16F/16R transmission includes:

  • Wet clutch
  • Platform-mounted shift levers (four gears, four ranges)
  • Declutch button on the gear lever
  • Left-hand reverser
  • Constant-mesh, helical-cut gears
  • Pressure-lubricated top shaft
  • Positive park pawl
  • Neutral start switch

All tractors have economy PTO (E-PTO), a fuel saving feature that allows producers to operate rear implements at 540 PTO rpm but at lower engine rpm. The result is lower engine vibration, reduced noise, less wear and tear on the engine, reduced fuel consumption, and increased operator comfort.

NOTE: See PTO functional area for more information on E-PTO.

Low-profile standard open operator station (OOS)

The standard OOS on 5ML Tractors was designed for low-clearance applications. It features a low-profile seat, a smaller-diameter steering wheel, protected controls, and a low-profile, rear-mounted rollover protective structure (ROPS). Combined with the sloping hood, this is beneficial to the operator’s visibility to the front of the tractor. Rounding off these standard features and incorporated into each operator platform is a shield which limits heat transfer from the hydraulics to the operator.

 

All of the most crucial operator controls are conveniently located within arms’ reach on the right-hand console control pod. The engine throttle control, selective control valve (SCV) levers, power take-off (PTO) engagement, and hitch-lift control levers are grouped together. On the 5ML, this control pod is positioned on the right-side fender, protected from low-hanging crops by a shield.

Right-hand fender shield and low profile seatRight-hand fender shield and low profile seat

Color-coded bands on the SCV levers correspond with the color on the rear SCVs, making it easy for any operator to determine which lever operates which rear SCV.

The 5ML Tractor also offers optional fender extensions to minimize crop disturbance, especially in orchards or tree nut applications. Two fender extension options are available to meet varying tire sizes and coverage preferences.

The foldable ROPS on the 5ML Tractor has a unique design and is 15.2-cm (6-in.) lower at maximum height than the standard 5M Tractors.

The shifter linkages are tighter to offer a more accurate shift pattern, which translates to a crisper throw between gears. Incorporating technology found on standard 5M Tractors, the 5ML now offers a declutch button, enabling the operator to shift gears within a range without the use of the foot clutch.

Dash details:

  • Cluster
  • Controls
  • Steering wheel

5ML Tractors also include the following features:

  • Retractable seat belts
  • Rear certified ROPS for OOS tractors
  • Heat shield limiting hydraulic heat passed onto the operator
  • Key-switch interlock prevents bypass starting
  • Audible and visual PTO warning alerts when the operator leaves the seat with the PTO engaged
  • Positive park position prevents the tractor from moving when the engine is off
  • Four amber turn-signal/flashing warning lights for road transport (these are break-away)
  • Slow-moving vehicle (SMV) sign alerts other road users during transport
  • Safety decals keep safety in the minds of new and experienced operators
  • Left- and right-hand steps provide easy and convenient access from both sides of the tractor
  • Fuel system is fully grounded to meet safety and fuel fill regulation requirements
  • For convenience of operation, the fuel and diesel exhaust fluid (DEF) fill are both on the same side with clearly marked and color coded caps. The DEF tank has a capacity of 12.1-L (3.2 gal.), which is more than enough to sustain proper tractor operation and fuel treatment for more than one full tank of diesel. A field-installed lockable fuel cap is offered for protection and peace of mind.

Transmission controls on PowrReverser™ transmission models:

Gear and range shift levers are located to the right of the operator. The gear lever incorporates a declutch button enabling the operator to shift gears without the use of the foot clutch. Unique knobs also make it easier to distinguish between the two.

Gear lever with declutch buttonGear lever with declutch button

Transmission controls on PowrQuad™ transmission models:

 

A single transmission control is located to the right of the operator. This control features the ability to shift through gears within a range using the rabbit button to increase gears and the turtle button to decrease gears. A range change can be completed with this control, as well by moving through A-D ranges similar to a traditional range controller. To aide in ease of operation, operators can use the integrated declutch button rather than the foot clutch to change ranges.

Transmission control on PowrQuad transmission modelsTransmission control on PowrQuad transmission models

A foot throttle with a platform pedal is located on the right side of the operator. The pedal is positioned for ease of use, yet does not clutter the floor. The hand throttle is easily accessible on the right hand console.

Engaged by either foot, the differential lock pedal is placed on the floor.

Differential lock buttonDifferential lock button

When the tractor is used in applications requiring the clutch and brake pedals to be used frequently, the operator will see the benefit of the suspended pedals.

The electrohydraulic forward/reverse direction lever is located on the left-hand side of the instrument console, connected to the steering column. There is also a guard for the reverser lever. Operated with the left-hand finger, the right hand is free to simultaneously run the loader, hitch, or hand throttle.

Left hand reverser with guardLeft hand reverser with guard

3-point hitch controls

Mechanical hitch controls are available on models equipped with a PowrReverser transmission, while models equipped with a PowrQuad transmission will have an electrohydraulic (EH) hitch. With an EH hitch, operators will have the functionality to raise and lower the hitch from the rear left-hand fender, reducing time when attaching and detaching implements.

Left-hand fender hitch controlLeft-hand fender hitch control

PTO controls and speeds
The 5ML features electrohydraulic PTO engagement on all models.

The push/pull knob on open station tractors is conveniently located beside the hand throttle on the right-hand side of the operator. When the PTO is engaged, a light on the instrument panel will illuminate and PTO speed is indicated by target bars. Models equipped with a PowrReverser transmission have a 540/540E rpm shiftable PTO while models equipped with a PowrQuad transmission have a three-speed PTO, 540/540E/1000 rpm.

Enhancing operator safety, the tractor does not start with the PTO engaged. An alarm sounds if the operator attempts to leave the seat with the PTO engaged. The PTO shaft is protected by a hinged shield.

Hydraulics controls
The color-coded bands on the levers, which control triple rear SCVs, correspond to the color of the dust cap and the SCV valve they control.

 

Mechanical front-wheel drive (MFWD) controls
All four-wheel drive (4WD) axles are equipped with the engage-on-the-go MFWD. This toggle switch is now located on the right-hand console.

 

Lighting controls – Multi-position dial
The five-position lighting package is straightforward with the lighting control switch on the right side of the steering column. The switch positions are: off, warning, work light, transport 1 (warning and high-beam headlights), and transport 2 (warning and headlights). A turn-signal lever is located on the left side of the steering column for quick and easy use.

PowrQuad™ transmissions

The PowrQuad™ transmission can be ordered on any of the 5ML Tractor models with three different options to meet producer needs: 16F/16R PowrQuad, 16F/16R PowrQuad with creeper, or 32F/16R PowrQuad. These three transmissions options come standard with a 540/540 Economy/1000 power take-off (PTO) and are compatible with the pressure-and-flow compensated (PFC) hydraulic system.

 

Pairing a PowrQuad transmission with PFC hydraulics provides more hydraulic flow, increased hitch lift capacity over PowrReverser models, and an electrohydraulic (EH) hitch control for repeatable hitch movements.

 

The ergonomically placed transmission control allows the operator to change gears and ranging with one simple control. Two buttons, a rabbit or turtle indicator, allow one to gear up (rabbit) or gear down (turtle) within a range. A range change can be made with a simple press of the declutch button rather than using the foot clutch. If preferred, the foot clutch remains incorporated into the operator station for use.

Integrated declutch and gear buttons on transmission controlIntegrated declutch and gear buttons on transmission control

Ranges on the transmission control can be selected by moving the controller in an H pattern. The lever selects ranges A, B, C, or D. Ranges C and D are fully synchronized. That means, when upshifting, operators can move from range C to D without stopping the tractor. On the downshift, operators can move from D all the way to B without stopping.

 

Maximum productivity is achieved with clutchless hydraulic shifting between forward and reverse and is ideal for loader work and any other applications that require frequent directional changes in tight spaces. An electrohydraulic fingertip directional lever control allows the operator to effortlessly switch directions with a small finger motion.

 

This control is located on the left side of the instrument console and selects forward, reverse, and neutral positions. It also allows the operator to steer and shift direction with the left hand, freeing the right hand to operate other tractor controls, such as the loader, rear implements, or hand throttle.

 

NOTE: A neutral start switch requires the directional lever be in the neutral position to start the engine.

 

PowrQuad transmissions include:

  • Wet clutch
  • Ergonomically mounted transmission lever controlling both gear and range changes
  • Declutch button on the range lever
  • Left-hand reverser
  • Constant-mesh, helical-cut gears
  • Pressure-lubricated top shaft
  • Positive park pawl
  • Three-speed PTO
  • Neutral start switch
Reversible stub shaft

All 5ML Tractors equipped with a PowrQuad transmission have a reversible stub shaft with six splines and 21 splines (38 mm [1.5 in.]). To switch between 540 and 1000 speeds, simply remove the snap ring, flip the PTO shaft, and reinstall the snap ring. The tractor PTO operates at 540-rpm speed when the six-spline end of the shaft is visible, and at 1000 speed when the 21-spline end of the shaft is visible.

 

The reversible 540/ 540E/1000 PTO stub shaft is located in a dry cavity to allow changing from 540/540E rpm to 1000 rpm or vice versa without any oil spillage. This interchangeability allows the matching of different implements. The reversible stub shaft improves uptime as no bolts are needed for removal, just a simple snap ring.

 

  A = snap ring
B = snap ring groove
C = bore 
Reversible stub shaft (six and 21 splines)

 

NOTE: See PTO functional area for more information on economy PTO.

Specifications

Official Test
Nebraska Test number Factory Observed
Engine
Manufacturer John Deere PowerTech PWX
Engine family EJDXL04.5211
Aspiration Turbocharged
Cylinders/Displacement, cu. in. (L) 4/276 (4.5)
Cylinder Liners Wet Sleeved
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard
40 (151)
Underhood muffler Yes
Performance
Advertised PTO hp (kW) @ Rated rpm 100 (74.6) @ 2100 per SAE
Official PTO hp (kW) @ Rated rpm
Advertised Engine hp (kW) @ Rated speed 115 (85.8) @ 2100 per ISO 97/68/EC
Max Unballast Drwbr hp (kW) @ Eng rpm
Maximum Torque (PTO) @ rpm, lb-ft (Nm) 420 @ 1400
Max Torque Rise (80% rtd spd) @ Eng rpm
Maximum Torque Rise % (PTO) @ Eng rpm 30 @ 1400
Fuel Use, U.S. gal./hr & hp hr/gal. at:
PTO @ Rated Eng rpm
Standard PTO Speed @ Eng speed
Maximum PTO Power @ Eng rpm
Maximum Engine Power @ Eng rpm
Max Unballasted Drawbar Power @ Eng rpm
75% Load, Full Engine rpm (Unballasted)
75% Load @ Reduced rpm (Unballasted)
Transmission
Std. Transmission; Forward/Reverse 16F/16R PowrReverser
Opt. Transmission; Forward/Reverse
Reverser Left Hand, Electrohydraulic (optional)
On-the-Go Shifting (Yes/No/Partial) Partial
Clutch; Wet/Dry Wet
Creeper
Power Take-Off (PTO)
Standard Independent 540/540 Economy
Optional
PTO Speeds @ Engine rpm 540 @ 2100; 540E @ 1645
PTO Actuation Electro-hydraulic
Hydraulics
Type Open Center
Pump Rated Output, GPM (L/min.) Standard
24.7 (93.6)
Rated Flow @ One SCV, GPM (L/min.) 18.4 (69.9)
Max Output @ SCV Couplers, GPM (L/min.)
Maximum Operating Pressure, psi (kPa) 2900 (20000)
Maximum Hydraulic Power, hp (kW) 31.1 (23.2)
Hitch Draft Control Load Sense Type Mechanical
Remote Control Valves Available up to three
Hitch Category (SAE Designation) 2; convertible to 1
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. Standard
5935 (2692)
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)
Sensing type Lower Link
Joystick SCV control Optional
Final Drive
Type Inboard Planetary
Differential controls Electro-hydraulic
Availability Front
NoFront & Rear
No
Engage On-the-Go Rear Differential Lock Yes
Axle Type Flanged
Brakes, Type and Control Hydraulic Wet Disc
Operator Station
Rollover Protective Structure, OOS Rigid - Foldable - Telescopic
Foldable, Mid-mountPlatform - Flat/Straddle
FlatGearshift Location - Console/Floor
Floor
Cab dB(A) Rating
80Seat Suspension System
Mechanical
2WD Dimensions
Wheelbase, in. (mm) 87 (2210)
Front Tread Range, in. (mm)
Rear Tread Range, in. (mm)
Minimum Rear Tread Setting, in. (mm)
Front Axle Clearance, in. (mm) 18
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab 7900 (3583)
MFWD Dimensions
Wheelbase, in. (mm) 90.6 (2300)
Front Tread Range, in. (mm)
Front Axle Clearance, in. (mm) 13.2 (335)
Turning Radius w/Brakes, ft (m) 12.8 (3.9)
Turning Radius w/o Brakes, ft (m) 14.4 (4.4)
Limited Slip Differential Yes
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab 8300 (3765)
4WD Dimensions
Wheelbase, in. (mm)
Wheel Tread, Min. to Max. in. (mm)
Turning Radius w/o Brakes, ft (m)
Nebraska Test Unballasted w/Duals, lb (kg)
Unballasted Weight, lb (kg)
Standard Tires
2WD Front
11.5L-15in. 8PR F3 BiasRear
19.5L-24 10PR R4 Bias
MFWD Front
12.5/80-18 12PR I3 (R4-type tread) BiasRear
19.5L-24 10PR R4 Bias
4WD
Track widths
Miscellaneous
Country of Manufacture Augusta, GA
Ballasting Restrictions, lb (kg)
*Notes Updated 8/21/2009

Accessories and Attachments

Axle - Rear

Rear Axle 1.2 In. Extension (30 mm) - L154683

Axle extensions are required to achieve wider tread settings.

Rear Axle 1.6 In. Extension (40 mm) - L154682

Axle extensions are required to achieve wider axle tread settings.

Rear Axle 4.4 In. Extension (111 mm) - L154684

Axle extensions are required to achieve wider axle tread settings.

Engine

Auxiliary Front Drive Coupler Kit - LVB24989

The flexible engine-mounted coupler provides auxiliary power for driving a wide variety of attachments, including hydraulic pumps and generators.

Engine Block Heater (110V) - RE227949

A screw-in type 120-V element heats coolant to warm vital engine parts in cold weather. This ensures fast starts and better lubrication at startup, reducing engine wear. It also provides additional starting capabilities for operators requiring cold-weather operations.

A battery with a minimum of 925 CCA is required.

Guards

Controls Guarding Kit - LVB26034
Shield Kit, Fuel Tank - BSJ10103

Hydraulics

3rd Function Mid SCV (upgrade from Dual Mid SCV) - BSJ10101
3rd Function Rear SCV (Upgrade from Dual SCV) - BSJ10099
Dual Mid SCV (Upgrade from no mid SCV) - BSJ10097
Dual Mid SCV (Upgrade from no mid SCV) - BSJ10330
Oil Collection System (Bucher SCVs only) - BSJ10342

Miscellaneous

Backup Alarm Kit - LVB25022
Backup alarmBackup alarm

This attachment is for operators who require an alarm in reverse speeds to satisfy safety regulations and governmental bid requirements. 

 

The alarm is rear mounted and designed to provide optimum clearance from the 3-point hitch. 

Front Utility Box - BRE10151

With loads of capacity, two removable shelves, and an innovative front door and lid design, this new tractor utility box breaks new ground for convenience, versatility, and rugged design. Grease guns, tow chains, hitch pins, and many other essential items can be stored safely and can be easily accessed, putting an end to cluttered cabs.

Front utility boxFront utility box
Front utility box and bracketFront utility box and bracket

Built from welded, heavy-gauge sheet steel, this new box offers long-term durability not seen with other toolboxes. A heavy-duty gas strut on the lid and locking pins make opening and locking simple and easy.

Specifications:

  • Made in the USA
  • 23 in. x 8 in. x 12 in.
  • Two removable shelves
  • Heavy-duty construction
  • Fold down front door for easy access
  • Mount with existing R127764 tractor weights using BRE10153 bracket
  • Mount on 9X30 Series Wheel Tractors (front left side) using BRE10291 bracket
Front Utility Box Bracket - BRE10153

With loads of capacity, two removable shelves, and an innovative front door and lid design, this new tractor utility box breaks new ground for convenience, versatility, and rugged design. Grease guns, tow chains, hitch pins, and many other essential items can be stored safely and can be easily accessed, putting an end to cluttered cabs.

Front utility boxFront utility box
Front utility box and bracketFront utility box and bracket

Built from welded, heavy-gauge sheet steel, this new box offers long-term durability not seen with other toolboxes. A heavy-duty gas strut on the lid and locking pins make opening and locking simple and easy.

Specifications:

  • Made in the USA
  • 23 in. x 8 in. x 12 in.
  • Two removable shelves
  • Heavy-duty construction
  • Fold down front door for easy access
  • Mount with existing R127764 tractor weights using BRE10153 bracket
  • Mount on 9X30 Series Wheel Tractors (front left side) using BRE10291 bracket
PowrReverser Modulation Control Kit - LVB25727
Modulation knobModulation knob

Change the transition speed of the PowrReverser transmission with a simple dial located near the steering column. This knob is used to adjust modulation sensitivity.

 

Adjust the aggressiveness of the forward to reverse transition, for either a quick fast transition or a smoother, slower transition.

Safety Chain Support Kit - RE19428
Service Horn - AL203265

Operator Environment

Self - Leveling Cup Holder - BRE10152

A favorite worldwide, the RAM self-leveling cup holder is now available as a kit - designed specifically for Deere equipment. It is easily installed to keep your favorite beverage upright even in the roughest terrain. The perfect accessory for any cab that has 10-mm mounting bosses.

Self-leveling cup holder John Deere branded beverage insulator includedSelf-leveling cup holder John Deere branded beverage insulator included
#

The new cup holder features a unique self-leveling design. This pivoting design allows easy adjustment for the holder while offsetting motion of the vehicle when moving.

Features and applications:

  • Self-leveling action reduces spills
  • Durable design for rough environments
  • Easy adjustable mounting for ideal placement
  • Includes John Deere branded beverage insulator
  • Compatible with most monitor brackets and all 10-mm threaded bosses

Operator's Station

Accessory mounting bracket, short right side front or rear - RE343680

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.

Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.

Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount
Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount
USB charger simultaneously charging two devicesUSB charger simultaneously charging two devices
#

Features:

  • Dual USB sockets give more options for in cab devices
  • 4.2A output to simultaneously charge two tablets or other USB devices
  • Sleek, compact design reduces clutter in the cab
  • Blue light-emitting diode (LED) indicator informs that power is on

RAM is a trademark of National Products Inc.

Cell phone mount kit - BRE10015

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.

Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.

Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount
Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount
USB charger simultaneously charging two devicesUSB charger simultaneously charging two devices
#

Features:

  • Dual USB sockets give more options for in cab devices
  • 4.2A output to simultaneously charge two tablets or other USB devices
  • Sleek, compact design reduces clutter in the cab
  • Blue light-emitting diode (LED) indicator informs that power is on

RAM is a trademark of National Products Inc.

Dual USB Charger - RE566705

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.

Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.

Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount
Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount
USB charger simultaneously charging two devicesUSB charger simultaneously charging two devices
#

Features:

  • Dual USB sockets give more options for in cab devices
  • 4.2A output to simultaneously charge two tablets or other USB devices
  • Sleek, compact design reduces clutter in the cab
  • Blue light-emitting diode (LED) indicator informs that power is on

RAM is a trademark of National Products Inc.

PTO

1000/540/540E RPM Power Take Off Kit - BLV10099

Vandal Protection

Vandal Protection, Lockable Fuel Tank Cap - AL213203

Weights

Weight, Rear Wheel - 95 Lb. - R213907
Rear-wheel weightRear-wheel weight

For improved traction and/or ballast, 95-lb rear-wheel weights can be installed.

See the ballasting and optimizing performance section in the sales manual or the tractor's operator's manual for additional ballasting information.