New H310 Loader

Utility Loaders
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Superior strength and visibility
  • For heavy-duty chores
  • Parking stands are integrated on the loader

More Info

Features

Single-point hydraulic connection saves time
Single-point hydraulic connection on row crop tractor (closed)Single-point hydraulic connection on row crop tractor (closed)
Single-point hydraulic connection on utility tractor (closed)Single-point hydraulic connection on utility tractor (closed)

The H240, H260, and H310 Loaders can be ordered with a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Concealed oil lines improve appearance and reduce damage
Concealed oil lines through boom armConcealed oil lines through boom arm
#
Oil lines routed through the boom armOil lines routed through the boom arm
Oil lines routed through the torque tubeOil lines routed through the torque tube

Over time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.

 

To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.

Loader removal (parking) made easy
Parking standsParking stands
#

John Deere loaders are easily removed and reinstalled on tractors without tools. The parking system allows removing or attaching the loader to the tractor in minutes without the need for tools.

 

To remove or park the loader, apply slight down pressure to the loader boom with the bucket dumped at approximately a 30-degree angle. With the tractor in park, lower the parking stands and place the mast pins in the open position.

 

To watch a video of parking and attaching an H-Series loader click here.

Removing or parking the loader
Parking stand in stored positionParking stand in stored position
Removing parking standRemoving parking stand
Mast pin in the closed positionMast pin in the closed position
Rotating mast pin to the open positionRotating mast pin to the open position

Utilizing the boom circuit with the tractor in neutral, rotate the mast forward until the mast has rotated past the pin location on the mounting frame by extending the lift cylinder. Now using the bucket circuit, roll back the bucket until the mast is removed from the pocket and will clear the tires.

Mast pin in the open positionMast pin in the open position
Masts rotate forward, then bucket rolled backMasts rotate forward, then bucket rolled back

With the tractor in park, shut the engine off and relieve the hydraulic pressure as indicated for the tractor (rotating the joystick). Disconnect or open the single-point hydraulic connector (or remove couplers if no single point is installed).

Disconnect/open single-point hydraulic connectionDisconnect/open single-point hydraulic connection
Disconnect/open single-point hydraulic connectionsDisconnect/open single-point hydraulic connections

Store the loader half of the single-point connector or hoses, and back away from the loader.

Single-point hydraulics disconnectedSingle-point hydraulics disconnected
#
Parked loaderParked loader
Boom lockout for easy service
Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

A hydraulic shut-off valve is included with the H-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

False rod bucket cylinders improve productivity
False rod cylinderFalse rod cylinder
#

Fast bucket cycle times are important to dump the load from the bucket as quickly as possible, (quite often) in order to be as productive as possible, while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the mechanical self-leveling loaders.

 

Therefore, all MSL H-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

Specifications

Compare >>>

Select up to 2 models to compare specifications

John DeereH310 Loader
Add Model
Add Model
Tractor
Model 6105R/6115R/6125R
Front tire 16.9R24
Rear tire 18.4R38
Front axle configuration MFWD w/ Limited Slip Differential
Wheelbase 2580 mm
101.6 in.
Pump capacity 114 L/min
30.1 gpm
Rated pressure 2901 psi
200 bar
Loader
Leveling configuration Mechanical Self Leveling (MSL)
Bucket used Materials 73 in.
Materials 1850 mm
Bucket weight 503 lb
228 kg
Lift capacity at full height Measured at pivot (U)
3746 lb
1699 kgMeasured at 800 mm ahead of pivot (V)
1846 kg
4070 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
2187 kg
4822 lbMeasured at 800 mm ahead of pivot (X)
2090 kg
4608 lb
Boom breakout force Measured at pivot (Y)
2677 kgf
5902 lbfMeasured at 800 mm ahead of pivot (Z)
2335 kgf
5148 lbf
Bucket rollback force capacity At maximum height (VV)
1513 kgf
3336 lbfAt 59-in. (1500-mm) lift height (XX)
3003 kgf
6620 lbfAt ground-level line (ZZ)
3059 kgf
6744 lbf
Dimensions Maximum lift height (A)
3855 mm
151.8 in.At full height - bucket level(B)
3661 mm
144.1 in.At full height - bucket dumped (C)
2826 mm
111.3 in.
Overall length (I+F), ft (m) 5 m
16.4 ft
Overall height in carry position (J)
Digging depth (H) 31 mm
1.2 in.
Reach At maximum height (D)
800 mm
31.5 in.At ground level - bucket level (F)
2422 mm
95.4 in.
Bucket angle Dump angle, degrees (E)
-7 degree (angle)Rollback angle, degrees (G)
42 degree (angle)Dump angle, ground
-95 degree (angle)
Cycle times Loader raise, seconds
2.3 secondsLoader lower, seconds
1.9 secondsBucket dump, seconds
1.4 secondsBucket rollback, seconds
1.4 seconds

Accessories and Attachments

Ballast Box

Large Ballast Box - BW15852

Buckets

73 In. (1850 mm) Global Heavy Duty Bucket - BW15935
Heavy-duty bucket (shown with grapple)Heavy-duty bucket (shown with grapple)
#
73 In. (1850 mm) Global Materials Bucket - BW15937
Materials bucketMaterials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.

85 In. (2150 mm) Global High Volume Bucket - BW16006

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.

85 In. (2150 mm) Global Materials Bucket - BW15936
Materials bucketMaterials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.

Cutting Edges

85 In. (2150 mm) Replaceable Bucket Cutting Edge with Hardware - BW14267
Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge

EH Valve

E-ICV Valve and Parts (3rd Function) - BW15118
E-ICV Valve and Parts (3rd Function) - BW15987
E-ICV Valve and Parts (3rd Function) - BW15988
Mid-Mount E- ICV Valve and Parts (3rd Function) - BW15314

GRAPPLES

Five-tine round bale and silage grapple with grille - BW16161
Five-tine round bale/silage grapple with grilleFive-tine round bale/silage grapple with grille
#

All of the H-Series Loaders use the same five-tine pin-on grapple. The advantages of this grapple are:

  • The pin-on method puts the least amount of stress possible on the bucket.
  • The grapple has a wide stance, making it more difficult to twist.

High-performance operators will choose the five-tine grapple for its increased durability and load-carrying capacity. Advantages include:

  • The ability to handle two large round bales instead of one (where loader capacity allows).
  • Strong grapple arms allow the bucket capacity to be increased by almost twice the amount of normal bucket capacity in materials such as silage.

The grapple is equipped with twin cylinders to provide excellent clamping force. 

NOTE: The center tine of the five-tine grapple is slightly off center to avoid contact with the placement of optional digging teeth.

NOTE: The grapple is not compatible with materials or high-volume buckets.

Guards

Heavy Duty Hood Guard - BW15535

The hood guard's basic function is to:

  • Help protect the tractor grill and hood from falling debris or stationary objects such as a wagon or mixer while loading
  • Allow for lighting at night

 

Compatibility:

  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would over load the front axle)
  • Cannot be used with a front hitch

 

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight bracket. This is so that the front weight bracket is the first point of contact against lower stationary objects.

Hood Guard - BW14740
Hood guard on 6210 TractorHood guard on 6210 Tractor

The hood guard's basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer while loading
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

 

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.

Hood Guard - BW15800
Hood guard for 5M Series TractorsHood guard for 5M Series Tractors
Hood guard for 6D Series TractorsHood guard for 6D Series Tractors

The heavy-duty hood guard is compatible with 5M (5065M, 5075M, 5085M, 5095M, 5100M, 5105M, 5115M), 6D – MY12 and prior (6100D, 6115D, 6130D, 6140D), 6D – IT4; model years 2013 -2015(6105D, 6115D, 6130D, 6140D) Tractors, and 6E FT4 MY16 (6105E, 6120E, 6135E).

The basic function of a hood guard is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night

The hood guard:

  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • For the 5M Series Tractors, the bottom bar must be removed for usage with front hitch for storage position of the center link.

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight bracket. This is so the front weight bracket is the first point of contact against lower stationary objects.

If a front weight bracket is not used, the lower bar can be moved downward to improve the protection of the grille below the lights.

The features of the hood guard include:

  • Folds down to allow the hood to open and provide access to the battery and filter
  • Extra steel behind the mainframe to increase strength
  • High height to better protect the top of the hood
Hood Guard - BW16009
Hood guard for 5E Interim Tier 4 (IT4) 4-Cylinder TractorsHood guard for 5E Interim Tier 4 (IT4) 4-Cylinder Tractors
#

The hood guard's basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects. 

Hood Guard - BW15892
Hood guard on 6R TractorHood guard on 6R Tractor
Hood guard for 6R folded downHood guard for 6R folded down

 The hood guard's basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night


Compatibility:

  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch


It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight bracket. This is so the front weight bracket is the first point of contact against lower stationary objects. The height of the hood guard allows better protection for the top of the hood and allows operators to see the top of the hood guard.

Hood Guard - BW16146
Hood guard for 5M Series TractorsHood guard for 5M Series Tractors
Hood guard for 6D Series TractorsHood guard for 6D Series Tractors

The heavy-duty hood guard is compatible with 5M (5065M, 5075M, 5085M, 5095M, 5100M, 5105M, 5115M), 6D – MY12 and prior (6100D, 6115D, 6130D, 6140D), 6D – IT4; model years 2013 -2015(6105D, 6115D, 6130D, 6140D) Tractors, and 6E FT4 MY16 (6105E, 6120E, 6135E).

The basic function of a hood guard is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night

The hood guard:

  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • For the 5M Series Tractors, the bottom bar must be removed for usage with front hitch for storage position of the center link.

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight bracket. This is so the front weight bracket is the first point of contact against lower stationary objects.

If a front weight bracket is not used, the lower bar can be moved downward to improve the protection of the grille below the lights.

The features of the hood guard include:

  • Folds down to allow the hood to open and provide access to the battery and filter
  • Extra steel behind the mainframe to increase strength
  • High height to better protect the top of the hood

Hoses and Parts

Hoses and Parts (2 Function) - BW15844
Hoses and Parts (3 Function) - BW15845
Hoses and Parts (3rd Function) - BW16069
Hoses and Parts (3rd Function) - BW16103
Hoses and Parts (3rd Function) - BW16187

Hydraulic Connections

2 Function Mid-Mount Quick Couplers - BW16052
Two function
Two function quick couplerTwo function quick coupler
#

The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To watch a video of how to use quick couplers click here.

NOTE: this video is intended to show the functionality of quick couplers only. Location of the connection varies across different loaders. 

Three function
Three function quick couplerThree function quick coupler

The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

2 Function Mid-Mount Quick Couplers - BW16123
Two function
Two function quick couplerTwo function quick coupler
#

The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To watch a video of how to use quick couplers click here.

NOTE: this video is intended to show the functionality of quick couplers only. Location of the connection varies across different loaders. 

Three function
Three function quick couplerThree function quick coupler

The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

2 Function Single Point Coupler, Loader Half - BW15914
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

2 Function Single Point Hydraulic Connection - BW16074
2 Function Single Point Hydraulic Connection - BW16100
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

2 Function Single Point Hydraulic Connection - BW16400
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

2 Function Single Point Hydraulic Connection - BW16399
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

2-Function Mid-Mount Quick Couplers - BW16959
Two function
Two function quick couplerTwo function quick coupler
#

The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To watch a video of how to use quick couplers click here.

NOTE: this video is intended to show the functionality of quick couplers only. Location of the connection varies across different loaders. 

Three function
Three function quick couplerThree function quick coupler

The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

2-Function Single Point Hydraulic Connection - BW16961
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

3 Function Mid-Mount Quick Couplers - BWA1580
Two function
Two function quick couplerTwo function quick coupler
#

The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To watch a video of how to use quick couplers click here.

NOTE: this video is intended to show the functionality of quick couplers only. Location of the connection varies across different loaders. 

Three function
Three function quick couplerThree function quick coupler

The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

3 Function Mid-Mount Quick Couplers - BWA1589
Two function
Two function quick couplerTwo function quick coupler
#

The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To watch a video of how to use quick couplers click here.

NOTE: this video is intended to show the functionality of quick couplers only. Location of the connection varies across different loaders. 

Three function
Three function quick couplerThree function quick coupler

The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

3 Function Mid-Mount Single Point Hydraulic Connection, Loader Half - BWA1546
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

3 Function Multi-Coupler - BW16075
3 Function Multi-Coupler - BW16402
3 Function Multi-Coupler, Loader Half - BW16401
3 Function Quick Couplers - BW16051
3 Function Quick Couplers - BW16124
3 Function Single Point Hydraulic Connection - BWA1588
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

3 Function Single Point Hydraulic Connection - BWA1581
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

3 Function Single Point Hydraulic Connection (tractor and loader half) - BW16960
3-Function Quick Couplers - BW16958
Grapple Coupler Oil Lines and Bracket, Quick Couplers - BW16048
Two function
Two function quick couplerTwo function quick coupler
#

The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To watch a video of how to use quick couplers click here.

NOTE: this video is intended to show the functionality of quick couplers only. Location of the connection varies across different loaders. 

Three function
Three function quick couplerThree function quick coupler

The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Kit, 3rd Function Quick Coupler Parts - BW16133
Kit, 3rd Function Single Point Connection Parts - BW16132

Hydraulic Controls

2 Function Hoses and Parts - BW16068
2 Function Hoses and Parts - BW16186

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

2 Function Hoses and Parts - BW16635

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

2 Function SLC, M-ICV, Hoses and Parts - BWA1510
2 Function SLC, M-ICV, Hoses and Parts - BWA1586

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

2 Function SLC, M-ICV, Hoses and Parts - BWA1565

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

2 Function SLC, M-ICV, Hoses and Parts - BWA1567

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

2 Function Single Lever Control, M-ICV, Hoses and Parts for Field Installation - BWA1575
3 Function Hoses and Parts - BWA1584

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function Hoses and Parts - BW16636

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function Hydraulic Hoses and Controls - BWA1577
3 Function Hydraulic Hoses and Controls - BWA1578
3 Function Hydraulic Hoses and Controls - BWA1569
3 Function Hydraulic Hoses and Controls - BWA1570
3 Function Hydraulic Hoses and Parts - BWA1590
3 Function Hydraulic Hoses and Parts - BWA1591
3 Function Hydraulic Hoses and Parts - BWA1614
3 Function Hydraulic Hoses and Parts - BWA1615
3 Function SLC, M-ICV, Hoses and Parts - BWA1585
3 Function SLC, M-ICV, Hoses and Parts - BWA1587

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function SLC, M-ICV, Hoses and Parts - BWA1566

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function SLC, M-ICV, Hoses and Parts - BWA1568

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function SLC, M-ICV, Hoses and Parts - BWA1607

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

3 Function Single Lever Control, M-ICV, Hoses and Parts for Field Installation - BWA1576
Hoses and Couplers (2 Function) - BW15637
Hoses and Parts (2 Function) - BW16102

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Hoses and Parts (3 Function) - BWA1564

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Mid-Mounted Independent Control Valve (2 Function) - BW15985
Mid-Mounted Independent Control Valve (3 Function) - BW15986
Single Level Control and Valve (2 Function) - BW15773
Single Level Control and Valve (3 Function) - BW15774
Single Lever Control and Mounting Parts (2 or 3 Function) - BW15744
Single Lever Control and Mounting Parts (3 Function with GSS) - BW15785
Single Lever Control and Mounting Parts (3 Function with GSS) - BW15784
Single Lever Control and Mounting Parts (3 Function with GSS) - BW15807

LOADER MOUNTED FENDERS

Stationary fenders - BW15906
Stationary fender (H480 shown)Stationary fender (H480 shown)
#

Loader stationary fenders are highly recommended for those operating in conditions where the front axle will be in full oscillation and turn frequently or where tight turns are made while maneuvering through gates or obstacles that will catch tractor axle-mounted fenders.

 

The loader stationary fenders still provide coverage for debris from the tire, but they do not protrude to become damaged in operation. The fenders can be removed to enable better access for servicing as well.

Stationary fenders - BW16094
Stationary fender (H480 shown)Stationary fender (H480 shown)
#

Loader stationary fenders are highly recommended for those operating in conditions where the front axle will be in full oscillation and turn frequently or where tight turns are made while maneuvering through gates or obstacles that will catch tractor axle-mounted fenders.

 

The loader stationary fenders still provide coverage for debris from the tire, but they do not protrude to become damaged in operation. The fenders can be removed to enable better access for servicing as well.

LOADER SUSPENSION SYSTEM

Loader suspension system with manual on and off lever - BW15865
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with manual on and off lever - BW15816
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with manual on and off lever - BW16125
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with operator station on and off switch - BW15866
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with operator station on and off switch - BW15797
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with operator station on and off switch - BW16070
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Miscellaneous

Bag of Parts - BW15647
Digging Teeth - BW15763

Digging teeth can be added to the heavy-duty bucket for easier digging in hard ground or for breaking loose hard-packed materials such as manure or silage. Digging teeth are not compatible with replaceable cutting edges.

Power Beyond Spacer - BW15379
Power Beyond Spacer - BW15989

Mounting Frame Components

Tool Box Bracket - BW16126
Tool Box Bracket - BW15971

OPERATOR'S MANUAL AND DECAL KIT

French North American operator's manual and decal kit - BW16142
Spanish North American operator's manual and decal kit - BW16143

Oil Tubes and Parts

Grapple Coupler Oil Line and Bracket - BW16045

Tractor Mounting Frames

Mounting Frame - BW15969
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BWA1583
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BWA1563
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BW16095
Mounting Frame - BW15885
Mounting Frame - BW16087
Mounting Frame - BWA1636
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.