New L341 Large Square Baler

Specifications

Bale	90x120 cm 3x4 ft
Width	120 cm 46.5 in.
Height	90 35
Length	60 up to 300 cm 24 up to 118 in.
Number of knotters	Six
Knives	21, 11, or 10
Machine - Width	3 m 9.8 ft
Machine - Height	2.75 m 9 ft
Machine - Weight	9,210 kg 20,370 lb
Minimum tractor requirement	108 kW 145 PTO hp - no Pre-Cutter 119 kW 160 PTO hp - with Pre-Cutter

Bale	90x120 cm 3x4 ft
Width	120 cm 46.5 in.
Height	90 cm 35 in.
Length	60 up to 300 cm 24 up to 118 in.

Intake width	Standard: 220 cm 86 in. Optional: 250 cm 97 in.
Pickup diameter	25.6 cm 10 in.
Number of tine bars 4-5	Four
Tine spacing	6.6 cm 2.6 in.
Pre-compression roller baffle
Pickup fixed gauge wheels
Pickup caster gauge wheels - pivoting
Pickup floating
Pickup protection

Number of plunger strokes	45 spm
Plunger stroke	69.5 cm 27 in.
Plunger roller size
Density control	Four hydraulic cylinders
Number of hydraulic cylinders
Bale chamber length	305 cm 120 in.
Control	ISOBUS - GreenStar™ 2 1800 or GreenStar 3 2630

Number of knotters	Six
Cleaning system
Knotter tracking system
Twine capacity (rolls)	30

High-capacity rotor	Yes
Knives	21, 11, or 10
Cutting length	44 mm 1.7 in. or 88 mm 3.5 in.
Knife protection	Individual spring
Knife cleaning system
Slide out floor	Yes
Driven crop roll (opt)

Single axle	600/50/22.5 or 710/40R/22.5
Tandem axle steered (optional)	500/55/20 or 550/45/22.5
Brakes system	Optional hydraulic

Length	8 m 26.25 ft
Width	3 m 9.8 ft
Height	2.75 m 9 ft
Weight	9,210 kg 20,370 lb
Minimum tractor requirement	108 kW 145 PTO hp - no Pre-Cutter 119 kW 160 PTO hp - with Pre-Cutter

Weighing device (opt)
Greasing system
Large square baler connection
Large square baler control
Storage box
Humidity sensor (opt)
Date collected